Configuring Riak KV for CS

Because Riak CS is an application built on top of Riak, it’s important to pay special attention to your Riak configuration when running Riak CS. This document is both a tutorial on Riak configuration as well as a reference document listing important configurable parameters.

The Proper Backends for Riak CS

The default backend used by Riak is the Bitcask backend, but the Riak CS package includes a special backend that should be used by the Riak cluster that is part of the Riak CS system. It is a custom version of the standard Multi backend that ships with Riak.

Some of the Riak buckets used internally by Riak CS use secondary indexes, which currently requires the LevelDB backend. Other parts of the Riak CS system can benefit from the use of the Bitcask backend. The use of the custom Multi backend enables Riak CS to take advantage of the strengths of both of these backends to achieve the best blend of performance and features. The next section covers how to properly set up Riak to use this Multi backend.

Additionally, the Riak CS storage calculation system uses Riak’s MapReduce to sum the files in a bucket. This means that you must tell all of your Riak nodes where to find Riak CS’s compiled files before calculating storage.

A few other settings must be modified to configure a Riak node as part of a Riak CS system, such as the node IP address and the IP address and port to use for communicating through Protocol Buffers. Other settings can be modified if necessary. The following sections describe how to configure a Riak node to work as part of a Riak CS system.

Setting up the Proper Riak Backend

First, edit Riak’s riak.conf, or the old-style advanced.config or app.config configuration file. These files can be found in the /etc/riak or /opt/riak/etc directories. By default, Riak uses the Bitcask backend. The first thing we need to do is to change that by removing the following line:

## Delete this line:

storage_backend = bitcask

{riak_kv, [
    %% Delete this line:
    {storage_backend, riak_kv_bitcask_backend},
]}

{riak_kv, [
    %% Delete this line:
    {storage_backend, riak_kv_bitcask_backend},
]}

Next, we need to expose the necessary Riak CS modules to Riak and instruct Riak to use the custom backend provided by Riak CS. We need to use either the advanced.config or app.config file and insert the following options:

{eleveldb, [
    {total_leveldb_mem_percent, 30}
    ]},
{riak_kv, [
    %% Other configs
    {add_paths, ["/usr/lib/riak-cs/lib/riak_cs-2.1.2/ebin"]},
    {storage_backend, riak_cs_kv_multi_backend},
    {multi_backend_prefix_list, [{<<"0b:">>, be_blocks}]},
    {multi_backend_default, be_default},
    {multi_backend, [
        {be_default, riak_kv_eleveldb_backend, [
            {data_root, "/var/lib/riak/leveldb"}
        ]},
        {be_blocks, riak_kv_bitcask_backend, [
            {data_root, "/var/lib/riak/bitcask"}
        ]}
    ]},
    %% Other configs
]}

{eleveldb, [
    {total_leveldb_mem_percent, 30}
    ]},
{riak_kv, [
    %% Other configs
    {add_paths, ["/usr/lib/riak-cs/lib/riak_cs-2.1.2/ebin"]},
    {storage_backend, riak_cs_kv_multi_backend},
    {multi_backend_prefix_list, [{<<"0b:">>, be_blocks}]},
    {multi_backend_default, be_default},
    {multi_backend, [
        {be_default, riak_kv_eleveldb_backend, [
            {data_root, "/var/lib/riak/leveldb"}
        ]},
        {be_blocks, riak_kv_bitcask_backend, [
            {data_root, "/var/lib/riak/bitcask"}
        ]}
    ]},
    %% Other configs
]}

It’s important to note that many of these values will depend on various directories specific to your operating system, so make sure to adjust them accordingly. The add_paths parameter, for example, assumes that Riak CS is installed in /usr/lib/riak-cs, while the data_root parameters assume that Riak is installed in /var/lib/.

This configuration also assumes that the Riak CS package is installed on the same machine as Riak. If not, the package will need to be copied onto the same box.

Allowing for Sibling Creation

Now, we need to set the allow_mult parameter to true. We can add this line to the either the riak.conf configuration file, or to the riak_core section of old-style advanced.config or app.config files:

buckets.default.allow_mult = true

{riak_core, [
    %% Other configs
    {default_bucket_props, [{allow_mult, true}]},
    %% Other configs
]}

{riak_core, [
    %% Other configs
    {default_bucket_props, [{allow_mult, true}]},
    %% Other configs
]}

This will enable Riak to create siblings, which is necessary for Riak CS to function. If you are connecting to Riak CS from a client library, don’t worry: you will not have to manage conflict resolution, as all Riak CS operations are strongly consistent by definition.

Specifying the Nodename and IP Address

Every Riak node has a name that can be specified in riak.conf using the nodename option. If you are using the old-style app.config configuration file, you will need to create a file named vm.args in the same directory as the app.config file, and set the node name using the -name flag. We recommend providing nodes a name of the form <name>@<host>. So if you have three nodes running on the host 100.0.0.1, you could name them riak1@100.0.0.1, riak2@100.0.0.1, and riak3@100.0.0.1, or you could give them names that are more specific, such as test_cluster1@100.0.0.1, user_data3@100.0.0.1, and so on. The example below demonstrates changing a node’s name to riak1@127.0.0.1, which would work for a node running on localhost:

nodename = riak1@127.0.0.1

-name riak1@127.0.0.1

You should name all nodes prior to starting them and connecting them to a cluster.

Testing the Configuration

Now that the necessary changes have been made to the Riak node’s configuration, we can attempt to start Riak:

riak start

This could take a second. We can then test whether the node is running:

riak ping

If the response is pong, then Riak is running; if the response is Node not responding to pings, then something has gone wrong.

If the node has not started properly, look at the erlang.log.1 in the /log directory of the node to see if the problem can be identified. One common error is invalid_storage_backend, which indicates that the path to the Riak CS library in advanced.config or in app.config is incorrect (or that Riak CS is not installed on the server). In spite of this error, make sure that you do not change the backend from riak_cs_kv_multi_backend to riak_kv_multi_backend.

Setting Up Riak to Use Protocol Buffers

The Riak Protocol Buffers settings reside in the Riak riak.conf, or in the riak_api section of the the old-style advanced.config or app.config files, which is located in the /etc/riak/ folder. The default host is 127.0.0.1 and the default port is 8087. You will need to change this if you plan on running Riak and Riak CS in a non-local environment. Replace 127.0.0.1 with the IP address of the Riak node and 8087 with the appropriate port:

listener.protobuf.internal = 10.0.2.10:10001

{riak_api, [
    %% Other configs
    {pb, ["10.0.2.10", 10001]},
    %% Other configs
]}

{riak_api, [
    %% Other configs
    {pb, ["10.0.2.10", 10001]},
    %% Other configs
]}

Note: The listener.protobuf.internal values in the Riak riak.conf (or the pb value in advanced.config/app.config) file must match the values for riak_host in the Riak CS riak-cs.config and Stanchion stanchion.conf (or riak_host the relative advanced.config/app.config) files.

It is also recommended that users insure that the size of Riak’s protobuf.backlog (or in the advanced.config/app.config files, the pb_backlog) is equal to or greater than the size of the pool.request.size, specified in the Riak CS riak-cs.conf (or the request_pool size in the advanced.config/app.config files).

If the pool.request.size value in Riak CS is changed, the protobuf.backlog value in Riak should be updated as well.

Other Riak Settings

The riak.conf and advanced.config files includes other settings, such as turning on the creation of log files and specifying where to store them. These settings have default values that should work in most cases. For more information, we recommend reading our configuration files documentation.

Specifying the Riak IP Address

By setting the Riak IP address you ensure that your Riak nodes have unique IP addresses, whether you’re working with a single node or adding additional nodes to the system. The Riak IP address setting resides in the Riak riak.conf or – if you’re using the app.config file – in the vm.args configuration file, which is located in the same /etc/riak/ directory (or in /opt/riak/etc/ on some operating systems).

Initially, the line that specifies the riak node IP address is set to the local host, as follows:

nodename = riak@127.0.0.1

-name riak@127.0.0.1

Replace 127.0.0.1 with the appropriate IP address or hostname for the Riak node.

Performance and Capacity settings

For performance reasons, we strongly recommended that you insert the following values into Riak’s riak.conf, or the old-style vm.args, configuration file, located in the /etc/riak or /opt/riak/etc folder:

erlang.max_ports = 65536

## This setting should already be present for recent Riak installs.

-env ERL_MAX_PORTS 65536

Disable JavaScript MapReduce

It is recommended that you not use the now-deprecated JavaScript MapReduce in conjunction with any version of Riak CS. For performance reasons, you should disable the VM that performs JavaScript MapReduce operations by setting the following in the riak.conf configuration file, or the riak_kv section of the old-style advanced.config or app.config:

javascript.map_pool_size = 0
javascript.reduce_pool_size = 0
javascript.hook_pool_size = 0

{riak_kv, [
    %% Other configs
    {map_js_vm_count, 0},
    {reduce_js_vm_count, 0},
    {hook_js_vm_count, 0}
    %% Other configs
]}

{riak_kv, [
    %% Other configs
    {map_js_vm_count, 0},
    {reduce_js_vm_count, 0},
    {hook_js_vm_count, 0}
    %% Other configs
]}